Product Introduction
- L-150 series cool resource are new developed products with the need of international market, widely used for strong illuminating in area of electronic industry, medical research, teaching, criminality,agriculture. By adopting reliable refrared ray filter technology,there is no heating effect in visible spectrum area.
- The products utilize excellent electrical equipment components that ensure reliability and safety.
- The design is compact, low noise, comfortable in use.
- Specifications:
Light: 240V 150W,the life of light is 50hours.We can also supply you with long-life lights.
Fan: 12V 0.25A
| Model |
Specification |
Remark |
| L-150 |
hard hose fiber 110V/220V 50Hz 100W |
you can use both single light guide and dual light guide |
| L-150 |
soft hose fiber 110V/220V 50Hz 150W |
|
| single light guide |
55CM |
the length can meet your requirments |
| dual light guide |
55cm |
the length can meet your requirments |
| Soft light guide |
100cm,200cm |
the length can meet your requirments |
| Prism |
|
Optional |
| Ring light guide |
1．Inter diameter50mm ;Outer diameter72mm
2. Inter diameter55mm ;Outer diameter77mm
3. Inter diameter53mm ;Outer diameter80mm
4. Inter diameter58mm ;Outer diameter81mm
5. Inter diameter61mm ;Outer diameter90mm |
Used for illumination for microscopes, CCE etc. with uniformly emitted light and no shadow over 360°. |
| Spot-to-line converter |
Length：40-150cm;
Fiber sheet width：0.2-3mm |
Capable of converting a spot light source to a line source, used for gap lighting and code scanning. |
All the above products can meet your special requirments.
Fiber Temperature range：-55℃-70℃
Acceptance angle： 60°
Light pad value≤1.18（650nm db/m）
Operation Instruction
- Before using,first confirm its voltage, then insert the power plug to the socket and turn the power switch, turn on its lamp. By rotating black button, light source voltage can be adjusted to change equipment output light intensity.
- Insert fiber (all types) connector to front panel socket of the instrument, Fasten closely the upper button,then it can work.
- There is a fastening button both on the top and the bottom of the instrument. By rotating the buttons counterclockwisely, halogen lamp can be removed with openning panels, old bulb can be pulled out from the lampholder.Then you plug into a new bulb, put it into light rooms, next you close light door and rotate closely the button.Please note:when changing the light,be sure the power is off,the temperature of light should be the same with the room temperature.
- We should strictly prevent contamination of oil in the process of equipment installation and use of halogen lamp, avoid direct touching with their hands. If they are polluted,you can wipe cleanly with aether mixed with some ethanol.
- Equipment should be placed at the place with moisture-proof, dust-proof to guarantee electrical insulation properties.
|
